Safe-T-Alert 62 Series Marine Carbon Monoxide - Flush Mount - White - 12v W/Trim Ring

Safe-T-Alert 62 Series Marine Carbon Monoxide - Flush Mount - White - 12v W/Trim Ring

62 Series Marine Carbon Monoxide - Flush Mount - White - 12V with Trim Ring

Features:

• This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
• NMMA Listed Component.
• Space Saving design works in harsh marine environments.
• Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.
• No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
• Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.
• Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
• End of Life Signal alerts boater to replace the alarm after 5 years of service.
• Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
• The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.

Specifications:

• Conforms To ANSI / UL STD 2034*
• * Testing Laboratory: ETL/Intertek
• Alarm Point: 400 PPM 4-15 Minutes
• Low voltage power warning at 7 Volts
• Power Supply and Current Draw: 37 mA @ 13.8 VDC
• Operational Range: 13.8 Volts +/-15%
• Low voltage power warning at 7 Volts
• Operating Temperature: -40°F to +158°F
• Case Size: 4.5″W x 3.25″H x 1.25″D